Old new designs!

Installation examples

Cast Aluminium Column - Tubes and Decorative Elements for Free Combination

Supporting pipes ø 80 and 100 mm, capitals, ornamental rings and base elements for customising cast iron columns


Tubes for Column Construction - Smooth and Flute

Aluminium tubes with a diameter of 80 or 100 mm - lengths 2000 / 2500 or 3000 mm

Pipe elements LISSE 80 - smooth - cast aluminium Smooth pipe LISSE ø 80 mm
116591 Further designs available
Pipe elements CANELA 80 - fluted - cast aluminium FEHLT
116592 Further designs available
Pipe elements LISSE 100 - smooth - cast aluminium Smooth pipe LISSE ø 100 mm
115695 Further designs available
Pipe element CANELA 100 - fluted - cast aluminium Flutes pipe CANELA ø 100 mm
116593 Further designs available

Capital or Base Elements - for Tubes With ø 80 mm

Upper and lower end pieces for smooth and fluted tubes - load-bearing and non-load-bearing elements

Capital or Base Elements - for Tubes With ø 100 mm

Upper and lower end pieces for smooth and fluted pipes - load-bearing and non-load-bearing elements

Ornamental Rings - for Tubes With ø 80 mm and ø 100 mm

Shaft rings for decorative structuring

Base elements - for Tubes With ø 80 mm and ø 100 mm

Plinth elements as a visually supporting base for cast columns

Skirting FIERA - cast aluminium - for tube ø 80 mm Skirting FIERA
116585 Further designs available
Base element FIERA - with plinth - cast aluminium - for tube ø 80 mm Skirting FIERA with plinth
116584 Further designs available
Base element KIARA - cast aluminium Skirting KIARA
116578 Further designs available
Base element KIARA - with plinth - cast aluminium Skirting KIARA with plinth
116577 Further designs available
Base element DUCIS - cast aluminium Skirting DUCIS
116587 Further designs available
Base element DUCIS with plinth - cast aluminium Skirting DUCIS with plinth
116586 Further designs available
Plinth element ROYAL - cast aluminium Skirting ROYAL
116580 Further designs available
Base element ROYAL- with plinth - cast aluminium Skirting ROYAL with plinth
116579 Further designs available

Fastening Elements - for Pipes ø 80 mm and 100 mm

Optional elements for mounting


The individual column - combine!



Whether in the entrance area or on the veranda, whether in courtyards or on terraces, cast-iron columns were once frequently seen as a special design element. You can also create a sublime sense of space in loggias, mezzanines or attics with cast iron columns.

The cast aluminium column elements

have a modular design and consist of individual components that can be freely combined with each other. As aluminium is three times lighter than steel, the columns are easy to install.

The pipes

are available in smooth or fluted (grooved) designs. Different lengths allow for different room heights. Despite the comparatively small diameter of 80 or 100 mm, the columns have a considerable load-bearing capacity and are therefore also statically relevant.

The decorative elements

for the top or bottom finish are plain or richly decorated. This allows them to be adapted to buildings in a wide range of styles.

Colour lacquering after mounting is possible without any problems. The seamless pipes, with a smooth or fluted surface, are available in three standard lengths. They can also be customised on request.