Handle rosette D57 - brass - unlacquered
Please select design:
Surface
Rose type
More information
Description
- Material: Solid brass
Surface: Polished - unlacquered
Square rose
With visible screw connection
Outside 50 x 50 mm
Inside Ø 50 mm
Including: Wood screws (pan-head screws)
General product information
- These door fittings are reproductions of models from various stylistic periods. They originate from German production and are manufactured in series using the permanent mould casting process.
Specific product information
-
Combination options
The lever handles have a collar diameter of 18 mm. The hole diameter of the door plates and handle rosettes is also 18 mm. They can therefore be combined with each other as desired.
Notes on ordering
The lever handles are always supplied as a pair of lever handles, the door plates and roses must be ordered per piece:
- For a room door set with backplates, you need a pair of lever handles and two door plates.
- For a room door set with roses, you need a pair of lever handles as well as two handle rosettes and two key escutcheons.
- For a WC set with backplates, you need a pair of lever handles as well as two door plates (distance 78 mm) and also a WC bolt set.
- For a WC set with roses, you need a pair of lever handles as well as four handle rosettes and also a WC bolt set.
Surface finishes
These fittings are available in various surface finishes:- Brass polished, unlacquered - gold-coloured - will darken, become slightly duller and more irregular
- Shiny nickel-plated - shiny silver-coloured - may become slightly darker
- Brushed, matt nickel-plated - matt silver-coloured with a light brushed texture - may become slightly darker
- dark patinated - brownish colouring - slightly irregular
- black matt - stove-enamelled
Mounting and care
-
Installation instructions
Mounting room door sets requires little effort: Door plates or handle rosettes are fitted, the spindle is inserted through the lock follower, the door handles are mounted on both sides of the spindle using a grub screw (if the spindle is too lengthy, it can easily be shortened to your door thickness using a hacksaw). Door plates or roses are aligned and mounted on the door leaf using the wood screws.All installation work should be carried out by a specialist. We accept no liability for damage caused by improper mounting.
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and vibrant in colour. The fitting develops its own patina and approaches the appearance of original historical fittings. If you wish, you can polish it again from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth.
