wall-mounted tap VINETRO PORZELLAN 3-hole - with straight spout
Please select design:
Surface
More information
Description
- Material: Brass
Various surface finishes
Cross handle Porcelaine white
Spout straight
Height 81 mm
Projection 162 mm
Rosette Ø 60 mm
Connection 1/2 inch spigot
Concealed valves
Projection 60 mm
Rosettes Ø 60 mm
Connections 1/2 inch
General product information
-
Beautiful basins need beautiful taps
The shape of the spout and, above all, the shape of the rotary handle determine the visual impression of this 3-hole wall-mounted tap in retro style.
This high-quality brass kitchen mixer tap is manufactured in Italy. The mixer tap is available in 5 different finishes.
Specific product information
- This mixer tap is a concealed mixer tap. The operating elements are visible on the wall apron of the basin. However, the wall must be prised open slightly at the rear, as the depth of the basin is not sufficient to completely conceal the supply pipes.
Mounting and care
-
Cleaning and care
Water contains limescale and other mineral components that can settle on the tap once the water has evaporated. Residues from various items such as toothpaste, body care products and cosmetics, as well as fruit and vegetable acids and wine, can also attack the coating. Therefore, rinse the mixer taps with clear water after each use.In order to maintain the high-quality surface of the mixer taps in the long term, careful daily cleaning is recommended. Do not use any aggressive or abrasive cleaning agents. Chlorine and bleaching agents, acids, ammonia and soda attack the surfaces and should not be used. Abrasive cleaning equipment, scouring powder and disinfectants should also be avoided.
The best cleaning agents are soap and water and a soft cloth. Be careful in areas with very hard water! Here, the alkaline components of the soap can combine with the limescale contained in the water to form so-called lime soaps, which are deposited as unsightly rims in the washbasin and on the fittings and are difficult to clean. In this case, use mild cleaning agents that are suitable for use on taps, e.g. the care product DECAL (HORUS). It protects the fittings from mineral residues and can be used as required.
Please note that damage caused by improper treatment or care cannot be recognised as a complaint.