Patio door handle MILANO - for lift-and-slide door - wrought iron
Please select design:
Surface
Base plate
More information
Description
- Material: Wrought iron
Various surface finishes
Handle length: 200 mm
Base plate: 40 x 190 mm
Thickness: 3 mm
Spindle: 10 mm
Screw hole spacing 80 mm
General product information
-
Lift and slide doors are space-saving solutions for very large door openings. They are precisely guided at the top and bottom and can therefore be easily opened and closed by sliding them sideways.
Turning the handle through 180° raises the door and then slides into the profile of the track. Even if this French door technology does not correspond to any historical model, our brass handles are an elegant compromise between old and new.
The classic place for a door knob is historically on the centre frieze of the door. It occupies a central position there and helps to shape the door with its ornamentation. Accordingly, historical door knobs are often heavily designed and decorated and appear very powerful.
The larger door knob models are usually not suitable for the lock area. If the frieze is not wide enough, there is otherwise a risk of pinching fingers when opening and closing. It is therefore essential to pay attention to the knob diameter when making your selection!
Specific product information
-
Distance and spindle thickness
The standard drill hole spacing is 80 mm. The spindle has a thickness of 10 x 10 mm. Material and surfaces
Wrought iron fittings are often used in rural architectural styles or in buildings with industrial charm. This fitting is available in two versions:- Wrought iron - galvanised and painted matt black
- Wrought iron - with rust patina