Patio door handle DOCO - for lift-and-slide door - brass
Please select design:
Surface
Base plate
More information
Description
- Material: brass
various surface finishes
various rosette finishes
handle lever length: 275 mm
screw hole spacing 80 mm
incl. spindle 10 mm (45 mm protruding)
incl. fixing screws M6
General product information
-
Lift and slide doors are space-saving solutions for very large door openings. They are precisely guided at the top and bottom and can therefore be easily opened and closed by sliding them sideways.
Turning the handle through 180° raises the door and then slides into the profile of the track. Even if this French door technology does not correspond to any historical model, our brass handles are an elegant compromise between old and new.
Specific product information
-
Surface variants
This door fitting is available in three finishes:- Brass polished, unlacquered - gold-coloured - will darken, become slightly duller and more irregular
- High-gloss nickel-plated - shiny silver-coloured - may become slightly darker
- Brushed, matt nickel-plated - matt silver-coloured with a light brushed texture - may become slightly darker
Distance and spindle thickness
The standard drill hole spacing is 80 mm. The spindle has a thickness of 10 x 10 mm.Design variants
The lift and slide door handles are available with a short or longer rose (base plate). If you have a lock installed in the door, we have also provided a design with euro profile cylinder perforation.Screw-on handle shells or small screw-on handles are available for the outside of the door.
- This handle shell is attached to the outside of a sliding patio door so that it can be opened and closed from the outside when open. It is fastened from the inside using metric screws. The distance between the drill holes is 80 mm as standard.
Mounting and care
-
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and lively in colour. The fitting develops its own patina and approaches the appearance of original historical fittings. If you wish, you can polish it again from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth.
