Outdoor light VENDOMES BM - free-standing lantern with motion detector
Please select design:
Design
More information
Product details and dimensions
- With motion detector
Range 5 m
Light body and pedestal made of painted aluminium
Available in various colour lacquers
Diffuser made of polycarbonate
Total height 1349 mm
Width of body 220 mm
Height of pedestal 767 mm
Base plate Ø 180 mm
Socket: E27 60 W
Protection class IP44
Delivered without light source
Specific product information
-
Motion detector
The motion detector is attached to the side of the base. This gives it a detection angle of approx. 270°. If you want to restrict the area, individual segments can be removed from the sensor. The detection range can be regulated by adjusting the movement sensor.
Mounting and care
-
Cleaning and care
Painted surfaces can be easily cleaned with a gentle household cleaner. Scouring milk can also be used for stubborn dirt. However, this should only be rubbed in carefully with little pressure using a soft cloth. Care should be taken not to scratch the surface. Painted brass surfaces can also be cleaned with a mild detergent or water and a soft cloth. Installation instructions
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.Scope of delivery
Fixing materials (plugs and screws) are included in the scope of delivery. A small amount of grease is also supplied, which should be used to pre-treat the screws during installation. The light source is not included in the scope of delivery. When selecting the light source, please observe the type and wattage specifications given on the label inside the luminaire.