Outdoor light PASSY (TGM) - with bishop's crook for corner mounting
Please select design:
Design
More information
Product details and dimensions
- Lamp body material: sheet zinc or brass
Bishop's rod material: brass
Various surface finishes
Body height 480 mm
Body width 370 x 370 mm
Projection 485 mm
Socket: 2 x E27 / max. 75 W
Protection class IP23
General product information
-
An outdoor light is not just a light, but always a design element of the entrance area or house façade.
Classic traditional lights have their very own charm and character. It is hard to imagine old town centres and buildings in a rural architectural style without them. Our French luminaire ranges are modelled on original models and are still produced in France.
Specific product information
-
Light source
This outdoor light has an E27 socket for normal light bulbs. It can of course also be fitted with energy-saving lamps or LED lamps. The light source is not included in the scope of delivery.This luminaire is suitable for light sources of energy classes A++ to E.
Material and surface
The basic material for these luminaire is brass or zinc. They are individually manufactured in a small factory using traditional methods. Each luminaire is unique, so to speak, and may vary slightly in terms of design and surface. The luminaire surfaces are treated and patinated or painted after production. This gives them their own authentic appearance.
We offer the luminaire in various surface finishes:- Zinc - grey-blue patinated, aged (zinc patina)
- Brass - dark patinated without lacquer (old brass)
- Brass - light patinated with clear lacquer varnish (brass patina)
- Brass - grey-green patinated (verdigris patina)
- Brass - rust-coloured patinated (rust patina)
The glazing is made of clear real glass. On request, the glass can also be supplied frosted for an additional charge.Protection class
This luminaire has protection class IP 23 - protected against rain - the luminaire body is not closed at the bottom.
Mounting and care
-
Installation instructions
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.
