Border tile - series ANTIGUA - 13 x 5 craquelé
Please select design:
colour
More information
Description
- 50 x 130 mm
For colour variants see
Rectangular tiles with crackle glaze 7.5 x 15 cm
Mounting and care
-
Cleaning and care
Glazed tiles can be cleaned simply with a sponge or soft cloth using neutral all-purpose cleaners (e.g. FILACleaner or MAPEI Keranet). To avoid damaging the glaze, please do not use steel sponges and do not use acidic cleaning agents! Impregnation
Impregnation is only necessary for tiles with crackle glaze. It is recommended to impregnate these before grouting, e.g. with FILA MP90.To do this, remove dirt, grease and other impurities from the tiles so that the impregnation can penetrate unhindered. Make sure that the tiles are completely dry before impregnation. Use a small, wide container for the impregnating agent. Make sure that the roller or brush is saturated with the impregnating agent. Apply the impregnating agent evenly to the surface of the tiles. It is important to apply the impregnation from top to bottom to prevent dripping. When working in this way, it is also easy to determine whether you have treated the entire surface or not. If necessary, it is easy to touch up. The application time is 10 minutes. Use an absorbent cloth to remove any excess residue from the tiles. Make sure that no residue remains!
Laying instructions
When laying the tiles, ensure a random cross-mix to achieve a lively and balanced appearance. To do this, remove the tiles from each box in turn as you lay them.Borders in a tile panel should be laid with staggered joints so that the joint pattern is interrupted and the surface is organised horizontally. This allows the colours and glaze effects to really come into their own.
All installation work must be carried out by a tiler who is familiar with the specific material properties. We accept no liability for improper processing.
