Outdoor light BORDEAUX (GM2) - with console - rust patina
Please select design:
Design
More information
Description
- Material of luminaire body: Zinc sheet
Surface: Zinc rust patina
Material of surface console: Brass
Surface: Rust patina
Body height 420 mm
Body width 270 x 270 mm
Projection 440 mm
Total height 780 mm
Socket: E27 / max. 100 W
Protection class IP23
General product information
-
An outdoor light is not just a light, but always a design element of the entrance area or house façade.
Classic traditional lights have their very own charm and character. It is hard to imagine old town centres and buildings in a rural architectural style without them. Our French luminaire ranges are modelled on original models and are still produced in France.
Specific product information
-
Light source
This outdoor light has an E27 socket for normal light bulbs. It can of course also be fitted with energy-saving lamps or LED lamps. The light source is not included in the scope of delivery.This luminaire is suitable for light sources of energy classes A++ to E.
Material and surface
This luminaire is made of high-quality anodised and painted aluminium. Anodising gives the luminaire a particularly hard and scratch-resistant seal and also protects it against corrosion.
We offer the luminaire in 15 different colour lacquering options. Some of the colours are defined RAL shades. If you are unsure about your choice, we can provide you with colour cards on loan.Protection class
This luminaire has protection class IP 44 - protection against the ingress of foreign bodies larger than 1 mm / protection against rain and splash water from all directions
Mounting and care
-
Cleaning and care
Painted surfaces can be easily cleaned with a gentle household cleaner. Scouring milk can also be used for stubborn dirt. However, this should only be rubbed in carefully with little pressure using a soft cloth. Care should be taken not to scratch the surface. Painted brass surfaces can also be cleaned with a mild detergent or water and a soft cloth. Installation instructions
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.Scope of delivery
Fixing materials (plugs and screws) are included in the scope of delivery. A small amount of grease is also supplied, which should be used to pre-treat the screws during installation. The light source is not included in the scope of delivery. When selecting the light source, please observe the type and wattage specifications given on the label inside the luminaire.
