Bell plate MASCARA S2 - brass
Please select design:
Surface
More information
Description
- Material: brass
various surface finishes
with intercom point perforation
2 doorbell contacts
2 nameplate frames
width: 80 - 100 mm
height: 326 mm
incl. flush-mounted box
L 200 x W 65 x D 70 mm
incl. fixing screws
General product information
- Whether simple, classic and discreet or decorated with floral ornaments - brass doorbell plates are a small piece of jewellery for the entrance area. They are reproduced in a small brass foundry according to our original patterns.
Specific product information
-
Doorbell contacts
The doorbell contacts are 12V screw contacts that are simply wired to the connection cables. If you would like to use a bell button as a light button, a relay can be connected behind it by your electrician. Doorbell contacts
The doorbell contacts are 12V screw contacts that are simply wired to the connection cables.
Mounting and care
- Brass is alive! In the brass version, the doorbell plate will darken slightly and become more irregular and lively in colour. If you wish, you can polish the doorbell plate from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. Just like painted or patinated surfaces, they should only be cleaned with a mild detergent and a soft cloth.
- We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper installation.
