Rotary switch series DO LOW - incl. Covering frame - porcelain white
More information
Description
Combination article - consisting of:
117664-003 Two-way-switch porcelain
117628 Porcelain - covering white
Rotary knob glossy chrome
You will find an overview of all available
individual elements listed
on the parts list (see info)
General product information
-
The DO series rotary switches are reminiscent of the old rotary switches from earlier times, but with a minimalist and almost modern design.
The DO series porcelain switch system is manufactured in Spain by the long-established manufacturer FONTINI, whose products we distribute in Germany. Porcelain has always been a popular material in electrical engineering: porcelain has a crystal-clear aesthetic, a pleasant feel and particularly good insulating properties.
Specific product information
-
Cover frame
All switches, sockets, dimmers and junction boxes can be ordered as so-called inserts and the required cover frames can be ordered separately. This allows you to freely combine and arrange switches and sockets.The distances of the multiple covers correspond to the standard distances of 71 mm. They can be used with existing installations without any problems.
Designs - switches and push-buttons
The rotary switches are available with 3 different functionalities:- Two-way switch - if you want to switch a light source from one or two positions
- Circuit switch - if you want to switch a light source from a third position
- Serial switch - if you want to operate two light sources with just one switch (one after the other)
Pushbuttons are generally used when operation is required from at least 3 points, e.g. in stairwells or lengthy corridors. In contrast to intermediate switches, this installation requires a impulse switch (relay), but the wiring and design of the light switches is simpler. A staircase light timer (time relay) can also be used instead of the impulse relay.
Designs - sockets and junction boxes
All sockets and junction boxes are also made of porcelain and are available in the colours white or black.VDE certification
All switches and sockets in this series comply with the standards required in Germany. They fulfil the strict VDE safety regulations.
Mounting and care
-
Installation instructions
All inserts are supplied on mounting plates so that they can be fitted to standard flush-mounted sockets.We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.