You are here: Products Everything for doors Mechanical bells and chimes Bell-pull, Art.-Nr. 100232

Bell-pull

iron wroughtconsisting in of following single part:-handle of cast brassheight 120 mm-2 wrought channelsdistance to the wll 100 mm-1 wrought pull rodlength 1000 mm-1 wrought bafflebaseplate 70 x 70 mm-1 wrought bell framebaseplate 70 x 70 mm-1 bronze bell with bell springdiameter 80 mm-1 stainless-steel wire with clipslength 2000 mm

iron wrought
consisting in of following single part:
-handle of cast brass
height 120 mm
-2 wrought channels
distance to the wll 100 mm
-1 wrought pull rod
length 1000 mm
-1 wrought baffle
baseplate 70 x 70 mm
-1 wrought bell frame
baseplate 70 x 70 mm
-1 bronze bell with bell spring
diameter 80 mm
-1 stainless-steel wire with clips
length 2000 mm

Ref.-No 100232

former 132.0001  1320001

Price: See Variants *

Order this product:

    • Order by phone: +49 (0) 761 15188-33
      Monday - Friday: 9:00 - 14:00 h
    • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
    • Please send your written order to:
      Replicata
      Florian Langenbeck und Verena Kohlbrenner GbR
      Ziegelhofstraße 214
      79110 Freiburg, Germany
      Order sheet as PDF
    • More product images and examples of installation

      Enlarge individual images

    • Variants

      bell pull - Brass/Bronze/Wrought iron - pull handle in brass

      Ref.-No 100232-001

      former 132.0001.00M 1320001

      Price: € 258,00 *

      Order this product:

        • Order by phone: +49 (0) 761 15188-33
          Monday - Friday: 9:00 - 14:00 h
        • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
        • Please send your written order to:
          Replicata
          Florian Langenbeck und Verena Kohlbrenner GbR
          Ziegelhofstraße 214
          79110 Freiburg, Germany
          Order sheet as PDF

      Glockenzug mit Ziehgriff in Nickel Glanz

      Ref.-No 100232-002

      former 132.0001.00N 1320001

      Price: € 273,00 *

      Order this product:

        • Order by phone: +49 (0) 761 15188-33
          Monday - Friday: 9:00 - 14:00 h
        • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
        • Please send your written order to:
          Replicata
          Florian Langenbeck und Verena Kohlbrenner GbR
          Ziegelhofstraße 214
          79110 Freiburg, Germany
          Order sheet as PDF
    • Scales

      Scale drawing of: iron wroughtconsisting in of following single part:-handle of cast brassheight 120 mm-2 wrought channelsdistance to the wll 100 mm-1 wrought pull rodlength 1000 mm-1 wrought bafflebaseplate 70 x 70 mm-1 wrought bell framebaseplate 70 x 70 mm-1 bronze bell with bell springdiameter 80 mm-1 stainless-steel wire with clipslength 2000 mm Scale drawing of: iron wroughtconsisting in of following single part:-handle of cast brassheight 120 mm-2 wrought channelsdistance to the wll 100 mm-1 wrought pull rodlength 1000 mm-1 wrought bafflebaseplate 70 x 70 mm-1 wrought bell framebaseplate 70 x 70 mm-1 bronze bell with bell springdiameter 80 mm-1 stainless-steel wire with clipslength 2000 mm
    • General product information

      The bell-pull - a purely mechanical functional principle

      Before electric bells were invented there was another way to attract attention to oneself besides knocking at the front door: the bell-pull. The mechanic is mounted on the outside, next to the front door. By pulling the handle of the pull rod a towing rope sets a bell in motion that is mounted on the inside, at a place where it is easily audible.

      Specific product information

      Audio test

      The small difference to the electric sounds in this day and age: That's how the bell sounds

      Optional accessories

      If required, we offer additional single elements:

      • single pulley (Art.No. 132.0006.007)
      • bell holder straight (Art.No. 132.0006.001)
      • single baffle (Art.No. 132.0006.002)
      • stainless stell wire in special lengths 4 m / 6 m / 8 m or 10 m (Art.No.132.0007)

    • Packaging, delivery, lead time

      Scope of delivery

      • handle made of cast brass (12 cm length)
      • 1 pull rod (100 cm length)
      • 2 wrought channels (10 cm length)
      • 1 wrought baffle (base plate 7x7 cm)
      • 1 wrought bell frame (base plate 7x7 cm)
      • 1 bronze bell (Diameter 8 cm), rivetted on bell spring
      • 1 stainless steel wire with clips (2 m length)
      Mounting material is not part of the scope of delivery. Please use screws and rawlplug suitable for the respective subsurface. You need 12 screws, 12 rawlplugs, a size 6 or 8 drill bit, a sharp wire cutter, and small tongs.

      Delivery time

      We usually have this item in stock and are able to ship immediately.

      Packaging and delivery

      We ship with DPD as insured package, delivery costs Germany 6,80 € (+ possibly island surcharge), EU shipping: 17 €, non EU-countries: shipping costs on request.

    • Instructions for mounting and care

      Mounting instructions

      Choose an installation location where there is enough space for the bell on a wall or door frame respectively on one side and the bell-pull on the other side. Mark the position where you want to mount the pull's baseplate. Above that mark drill a hole, horizontally through the wall or the door frame, for the wire.

      Mounting of the pull mechanism on the wall

      Mount the baseplate of the pull first. Pre-drill the 4 holes for the baseplate and then fasten the plate with screws. Attach the two rods vertically in a way that the pull rod hangs free and can be operated easily.

      Mounting of the bell (on the wall or ceiling)

      Mount the holder of the bell spring on the wall so that the wire comes out of the wall at the same height as the fixation lug of the bell spring. Once the holder is fastened, the bell is put on the square axle and is secured with a screw nut. The bell can be mounted on the wall or the ceiling. For fastening the baseplate to the ceiling it is necessary to turn the bell spring by 90° before putting it on the rod.

      Mounting of the wire

      To connect the wire and the pull rod you have to feed the wire through the hole in the wall/door frame. Fasten the wire with a loop at the lug of the bell or pull rod. In order to do so push one of the clips onto the wire. Now feed the end of the wire through the lug and back through the clip. Press the clip shut using tongs.

      Attach the other end of the wire at the other lug. Adjust the wire rope hoist in a way that it is only slightly tense and the pull handle returns to it's original position easily. Fasten this wire end with a loop at the lug. Before pressing the clip shut, check the tension once more. If the tension is okay, close the clip and cut the supernatant wire. The stainless stell wire can only be cut with a sharp wire cutter!

      Care instructions

      The rod of the bell pull has a graphitic coating. This coating offers limited protection against effects of the weather. To protect the bell-pull against effects of the weather we advise you to apply linseed oil at regular intervals. Brass lives! The surface of the brass pull handle is non-lacquered and is going to get darker, become more irregular and the colouration is going to become livelier. If desired you may refurbish the handle. We recommend the polishing wool €€œNevr Dull€€®.

    • Questions? Order?

      Advisory service by phone or in person and order processing

      Advisory service:
      Monday - Friday 9:00 - 14:00 h

      By telephone:
      +49 (0) 761 15188-33

      By email:
      Click here.

      Opening hours in Freiburg:
      Monday - Tuesday 14:00 - 18:00 h, Friday closed, Saturday 10:00 - 14:00 h

      Opening hours in Hamburg:
      Monday - Friday: 9:00 - 15:00 h and by appointment

      Pictures and further information about our showrooms

      Contact form

      Your messsage

      To send us your questions concerning item reference number 100232
      Bell-pull
      please fill out this form.

      Your contact information

      No mandatory fields! Please feel free to choose your preferred line of communication.

Mechanical bells and chimes

Search our website

Search for:

 

Tips for searching

Replicata showroom in Hamburg

Showroom in Hamburg

Visit us in our showroom...

Schinkelstraße 7, 22303 Hamburg, Germany


Opening hours:

Mon - Fri: 9:00 - 15:00 Uhr
and by appointment

Pictures and further information about location in Hamburg

Printed Catalogue

The Replicata catalogue 2021

Scrolling - browsing - get inspiration

Perhaps you would like to have a printed catalog in your hands? Then simply order it here using the form:

We will be happy to send you a copy (in German) free of charge.

Order catalog

If you are in a hurry, you can also download it as a PDF file here:

Download link

New products

Terrazzo tile BLOSSOM - Series Tierra - hexagonal Ø20 - grey / black

Terrazzo tile BLOSSOM - Series Tierra - hexagonal Ø20 - grey / black

In earlier times an almost infinite variety of shapes was available. We have expanded our product range once again and added new »old« articles to our standard product range.
»All new products«

Special offers

Besondere Gelegenheiten

Things happen ... Ever head of Murphy's law? Our inconvenience becomes a »special offer« for you.

List of favourites and shopping cart

You can save these products on your list of favourites or you add them to your shopping cart. The list of favourites and items in the shopping cart are saved until your next visit. You can also take notes and write down questions regarding the products on your list of favourites or in the shopping cart and send the list or your shopping cart with all notes and questions to us. You can also send a link to your favourites to friends or colleagues. Just try it.

Fontini by Replicata

Fontini by Replicata

NEW: Since end october we present the entire range of Fontini-switches on a specially designed website. Not only will you find the retro series from the replicata catalogue there but also modern switches, that may yield maximal contrast to historical building structures.

www.lightswitchesandsockets.com/

New products and more ...

We are happy to inform you about our new products via email. Unfortunately our newsletter is only available in German. If you don't mind, please register with your email address on our German website:

Click here for the German newsletter archive and the opt-in procedure

* incl. applicable VAT, plus shipping costs.