You are here: Products Door and window fittings Entrance door fittings Entrance door fittings in cast iron or wrought iron Entrance door fitting WISMAR - with roses - cast iron, Art.-Nr. 100416
Rose door fittings with fixed knob
on the exterior side
and moving lever on the interior side
brushed and waxed
spindle and screws
lever rose 78 x 78 mm
euro profile rose 82 x 68 mm
diameter of the door knob 70 mm
length lever 140 mm
Price: € 395,00 *
Order this product:
Enlarge individual images
Entrance door fittings are usually made as knob-and-lever sets. By this we mean the combination of a fixed knob on the outside of the door and a moveable lever on the inside, connected by a rotatable half spindle. With this kind of door fitting, the door can be opened from outside only with the key. All knob-and-lever sets can be produced as lever sets. With this variant you can open the door from inside and outside using the lever, however the door is not locked. As a special variant we offer these fittings with a fixed lever to the outside or rotatable knob.
The lock plates or roses for entrance door fittings are delivered with a punch hole for profile cylinders (abbr. PC) for mortice locks. The lock plate has a hole for the knob, or lever respectively, and a hole for the profile cylinder. Two standard distance dimensions apply in Germany: PC 92mm and PC 72mm Ã¢€“ measured from center lever hole to center of the round part of the hole for the profile cylinder. Unless stated otherwise we deliver our entrance door fittings with distance dimension PC 92mm Apartment doors often have locks with a distance of PC 72. Please check before placing orders. Older locks often have different dimensions Ã¢€“ other countries have different standard dimensions. If you decide to have a fitting with rose the distance dimension is irrelevant. Production of door fittings with round cylinders is also done on request.
Some door knobs are not symmetrically shaped. It is necessary to state the door hinge before placing orders, to ascertain that the door lever can be be installed correctly. The door hinge for doors that open inward are denominated as follows:
The historical look-and-feel of our entrance door sets is primary. Therefore these fittings are not certified safety door sets. All fittings have threaded sleeves that are soldered on the outside latch or rose respectively, thus installation is made through the door. The fitting cannot be unscrewed from the outside. The visible drill holes are for additional fastening with wood screws. We produce certain fittings with a 10mm outside plate, on request (available at extra cost).
Product content consists of:
We only have small quantities of some versions of these individually manufactured door fittings in stock. Please consider a lead time of 8 weeks for order related production.
We ship with DPD as insured package, delivery costs Germany 6,80 € (+ possibly island surcharge), EU shipping: 17 €, non EU-countries: shipping costs on request.
In order to protect the cast-iron surface it is advisable to treat the fitting with the protective wax we added to the delivery. Rust film can be removed with fine steel wool; afterwards treat the fitting with wax.
Monday - Friday 9:00 - 14:00 h
+49 (0) 761 15188-33
Opening hours in Freiburg:
Monday - Tuesday 14:00 - 18:00 h, Friday closed, Saturday 10:00 - 14:00 h
Opening hours in Hamburg:
Monday - Friday: 9:00 - 15:00 h and by appointment
Schinkelstraße 7, 22303 Hamburg, Germany
Mon - Fri: 9:00 - 15:00 Uhr
and by appointment
In earlier times an almost infinite variety of shapes was available. We have expanded our product range once again and added new »old« articles to our standard product range.
»All new products«
Things happen ... Ever head of Murphy's law? Our inconvenience becomes a »special offer« for you.
You can save these products on your list of favourites or you add them to your shopping cart. The list of favourites and items in the shopping cart are saved until your next visit. You can also take notes and write down questions regarding the products on your list of favourites or in the shopping cart and send the list or your shopping cart with all notes and questions to us. You can also send a link to your favourites to friends or colleagues. Just try it.
NEW: Since end october we present the entire range of Fontini-switches on a specially designed website. Not only will you find the retro series from the replicata catalogue there but also modern switches, that may yield maximal contrast to historical building structures.
* incl. applicable VAT, plus shipping costs.