You are here: Products Door and window fittings Entrance door fittings Entrance door fittings in cast brass Entrance door fittings Art Deco, Art.-Nr. 100618

Entrance door fittings Art Deco

Door fittings with fixed handle, on the exterior side and moving lever, on the interior side, , material:, massive brass, , available with different finishes, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm,

Simple entrance door fitting from the late Art Nouveau period, consisting of a classic plate with lever for the inside and a very big and heavy pull handle along with matching rose for the key hole. The dominating rectangular shapes are harmonized for example by gentle curves on the edges of the plates or the volute of the lever.

Door fittings with fixed handle
on the exterior side and moving lever
on the interior side

material:
massive brass

available with different finishes

including:
spindle and screws

dimensions:
length plate lever 295 mm
length plate PZ 110 mm
length plate handhold 275 mm
width plate lever 50 mm
width plate PZ 50 mm
width plate handhold 50 mm
length handhold 190 mm
length handle 135 mm

Ref.-No 100618

former 211.0060  2110060

Price: See Variants *

Order this product:

    • Order by phone: +49 (0) 761 15188-33
      Monday - Friday: 9:00 - 14:00 h
    • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
    • Please send your written order to:
      Replicata
      Florian Langenbeck und Verena Kohlbrenner GbR
      Ziegelhofstraße 214
      79110 Freiburg, Germany
      Order sheet as PDF
    • More product images and examples of installation

      Enlarge individual images

    • Variants

      handhold/lever set, , material:, massive brass, , surface:, polished, patinated, unvarnished, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm,

      Entrance door fittings Art Deco

      handhold/lever set

      material:
      massive brass

      surface:
      polished, patinated, unvarnished

      including:
      spindle and screws

      dimensions:
      length plate lever 295 mm
      length plate PZ 110 mm
      length plate handhold 275 mm
      width plate lever 50 mm
      width plate PZ 50 mm
      width plate handhold 50 mm
      length handhold 190 mm
      length handle 135 mm

      Ref.-No 100618-002

      former 211.0060.00M 2110060

      Price: € 462,00 *

      Order this product:

        • Order by phone: +49 (0) 761 15188-33
          Monday - Friday: 9:00 - 14:00 h
        • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
        • Please send your written order to:
          Replicata
          Florian Langenbeck und Verena Kohlbrenner GbR
          Ziegelhofstraße 214
          79110 Freiburg, Germany
          Order sheet as PDF
      handhold/lever set, , material:, massive brass, , surface:, shiny nickel-plated, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm,

      Entrance door fittings Art Deco

      handhold/lever set

      material:
      massive brass

      surface:
      shiny nickel-plated

      including:
      spindle and screws

      dimensions:
      length plate lever 295 mm
      length plate PZ 110 mm
      length plate handhold 275 mm
      width plate lever 50 mm
      width plate PZ 50 mm
      width plate handhold 50 mm
      length handhold 190 mm
      length handle 135 mm

      Ref.-No 100618-003

      former 211.0060.00N 2110060

      Price: € 498,00 *

      Order this product:

        • Order by phone: +49 (0) 761 15188-33
          Monday - Friday: 9:00 - 14:00 h
        • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
        • Please send your written order to:
          Replicata
          Florian Langenbeck und Verena Kohlbrenner GbR
          Ziegelhofstraße 214
          79110 Freiburg, Germany
          Order sheet as PDF
      handhold/lever set, , material:, massive brass, , surface:, satin nickel plated, brushed, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm,

      Entrance door fittings Art Deco

      handhold/lever set

      material:
      massive brass

      surface:
      satin nickel plated, brushed

      including:
      spindle and screws

      dimensions:
      length plate lever 295 mm
      length plate PZ 110 mm
      length plate handhold 275 mm
      width plate lever 50 mm
      width plate PZ 50 mm
      width plate handhold 50 mm
      length handhold 190 mm
      length handle 135 mm

      Ref.-No 100618-004

      former 211.0060.0NM 2110060

      Price: € 498,00 *

      Order this product:

        • Order by phone: +49 (0) 761 15188-33
          Monday - Friday: 9:00 - 14:00 h
        • Click here, to start your email-programme. We have already filled in the reference number and our email-address. Just complete with your note and send it.
        • Please send your written order to:
          Replicata
          Florian Langenbeck und Verena Kohlbrenner GbR
          Ziegelhofstraße 214
          79110 Freiburg, Germany
          Order sheet as PDF
    • Scales

      There is an roughly true to scale drawing as PDF to download.

      Scale drawing of: Door fittings with fixed handle, on the exterior side and moving lever, on the interior side, , material:, massive brass, , available with different finishes, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm, Scale drawing of: Door fittings with fixed handle, on the exterior side and moving lever, on the interior side, , material:, massive brass, , available with different finishes, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm, Scale drawing of: Door fittings with fixed handle, on the exterior side and moving lever, on the interior side, , material:, massive brass, , available with different finishes, , including:, spindle and screws, , dimensions:, length plate lever 295 mm, length plate PZ 110 mm, length plate handhold 275 mm, width plate lever 50 mm, width plate PZ 50 mm, width plate handhold 50 mm, length handhold 190 mm, length handle 135 mm,
    • General product information

      Entrance door fittings made of brass

      Our entrance door fittings are made of solid brass, a copper-zinc-alloy. They are manufactured in our own foundry using the traditional technique of sand casting. These entrance door fittings are reproduced according to our original modells and patterns.

      Specific product information

      Lever-handle-set / Pull-handle-set

      This pull-handle-set is designes as a combination of a fixed pull-handle on the outside of the door and a moveable lever on the inside. The lever is connected to the lock by a rotatable half spindle. With this kind of door fitting, the door can be opened from outside only with the key. The pull handle is cranked, i.e. angled sidewards, so that this fitting can also be used on narrow door frames. This fitting can be produced as lever set. With this variant you can open the door from inside and outside using the lever.

      Distance dimensions / Profile cylinder punch hole

      The lock plates or roses for entrance door fittings are delivered with a punch hole for profile cylinders (abbr. PC) for mortice locks. The lock plate has a hole for the knob, or lever respectively, and a hole for the profile cylinder. Two standard distance dimensions apply in Germany: PC 92mm and PC 72mm €€“ measured from center lever hole to center of the round part of the hole for the profile cylinder. Unless stated otherwise we deliver our entrance door fittings with distance dimension PC 92mm Apartment doors often have locks with a distance of PC 72. Please check before placing orders. Older locks often have different dimensions €€“ other countries have different standard dimensions. If you decide to have a fitting with rose the distance dimension is irrelevant. Production of door fittings with round cylinders is also done on request.

      Switch spindle/Square spindle

      Pull-handle sets are delivered with a switch spindle with plate for "through panel" mounting - 8mm square spindle with top case for size 10 socket, galvanized iron, slitted on both sides, length 70mm. Please let us know if your door has a punch hole on one side only. In this case we will deliver a clamp switch spindle 10/8 (size 10 socket, reduced to 8 mm), galvanized iron, length 70mm.

      Door hinge DIN left/DIN right

      It is necessary to state the door hinge before placing orders, to ascertain that the door lever and pull handle show can be installed correctly. The door hinge for doors that open inward are denominated as follows:

      • standing on the inside of the door, pulling the door towards oneself, the door is fixed on the left side of the frame = Door hinge DIN left
      • standing on the inside of the door, pulling the door towards oneself, the door is fixed on the right side of the frame = Door hinge DIN right
      Please inform us if your door opens outward!

      Available finishes

      This door fitting is available with the following finishes:

      • Polished brass, non lacquered, slighty pre-patinized €€“ gold-coloured €€“ going to get darker, become more irregular and dull
      • brass, shiny nickel-plated €€“ shiny silver-coloured €€“ may get a little darker
      • brass, satin nickel-plated €€“ dim silver-coloured - may get a little darker

      Mounting and safety

      The historical look-and-feel of our entrance door sets is primary. Therefore these fittings are not certified safety door sets. All fittings have threaded sleeves that are soldered on the outside latch or rose respectively, thus installation is made through the door. The fitting cannot be unscrewed from the outside. The visible drill holes are for additional fastening with wood screws. We produce certain fittings with a 10mm outside plate, on request (available at extra cost).

    • Packaging, delivery, lead time

      Scope of delivery

      Product content consists of:

      • 1 lever
      • 1 plate with pull handle for the outside
      • 1 additional PC rose for the outside
      • 1 plate for the inside
      • 1 clamp switch spindle 8/10 for one sided mounting
      • M5-thread screws for mounting through the door and additional wood screws (pan head screws) for fixing of the plates of roses

      Delivery time

      We only have small quantities of some versions of these door fittings in stock. Please consider a lead time of 8 weeks for order related production.

      Packaging and delivery

      We ship with DPD as insured package, delivery costs Germany 6,80 € (+ possibly island surcharge), EU shipping: 17 €, non EU-countries: shipping costs on request.

    • Instructions for mounting and care

      Instructions for mounting

      Mounting must only be carried out by a qualified specialist (carpenter). He has the tools and knowledge to mount the door fitting effortless. We cannot accept any liability for damages due to incorrect mounting. If you decide to mount the fitting by yourself we like to offer some useful advise: The mounting of entrance door fittings requires precise workmanship: The door must be drilled through in specified intervals, in order to be able to push through the threaded screws. The square spindle is pushed through the door from the outside. (The clamp switch spindle is pushed through from the inside and is fastend with a small grub screw on the inside of the spindle at the lock). The cylinder is put in his place and the plates are put on the door on both sides and are loosely screwed together with the threaded screws. The lever is put on the square spindle and is connected with the square spindle using a grub screw. If the screws or the square spindle are too long they can easily be cut to the right length using a metal saw. If the plates are aligned precisely, the screws can be fixed firmly. The plates are fixed with wood screws on the door leaf.

      Care instructions

      Brass lives! We always deliver brass fittings non lacquered. The surface is going to get darker, become more irregular and the colouration is going to become livelier. The door fitting will develop its own patina and converge to the look and feel of original historic fittings. If desired you may refurbish the mount. We recommend the polishing wool €€œNevr Dull€€®. Nickel-plated surfaces are sensitive to acid. They should be cleaned only with mild detergents and a soft cloth.

    • Questions? Order?

      Advisory service by phone or in person and order processing

      Advisory service:
      Monday - Friday 9:00 - 14:00 h

      By telephone:
      +49 (0) 761 15188-33

      By email:
      Click here.

      Opening hours in Freiburg:
      Monday - Tuesday 14:00 - 18:00 h, Friday closed, Saturday 10:00 - 14:00 h

      Opening hours in Hamburg:
      Monday - Friday: 9:00 - 15:00 h and by appointment

      Pictures and further information about our showrooms

      Contact form

      Your messsage

      To send us your questions concerning item reference number 100618
      Entrance door fittings Art Deco
      please fill out this form.

      Your contact information

      No mandatory fields! Please feel free to choose your preferred line of communication.

Search our website

Search for:

 

Tips for searching

Replicata showroom in Hamburg

Showroom in Hamburg

Visit us in our showroom...

Schinkelstraße 7, 22303 Hamburg, Germany


Opening hours:

Mon - Fri: 9:00 - 15:00 Uhr
and by appointment

Pictures and further information about location in Hamburg

Printed Catalogue

The Replicata catalogue 2018

Scrolling - browsing - get inspiration

Our print catalogue is actually no more available.

A new issue will be published in summer 2021.

You are welcome to register already here: We will be happy to send you our new print catalogue (in German language) free of charge.

Request our catalogue

New products

Cement - mosaictile MARULA - Series VIA - 20 x 20 - red / greybrown / grey

Cement - mosaictile MARULA - Series VIA - 20 x 20 - red / greybrown / grey

In earlier times an almost infinite variety of shapes was available. We have expanded our product range once again and added new »old« articles to our standard product range.
»All new products«

Special offers

Besondere Gelegenheiten

Things happen ... Ever head of Murphy's law? Our inconvenience becomes a »special offer« for you.

List of favourites and shopping cart

You can save these products on your list of favourites or you add them to your shopping cart. The list of favourites and items in the shopping cart are saved until your next visit. You can also take notes and write down questions regarding the products on your list of favourites or in the shopping cart and send the list or your shopping cart with all notes and questions to us. You can also send a link to your favourites to friends or colleagues. Just try it.

Fontini by Replicata

Fontini by Replicata

NEW: Since end october we present the entire range of Fontini-switches on a specially designed website. Not only will you find the retro series from the replicata catalogue there but also modern switches, that may yield maximal contrast to historical building structures.

www.lightswitchesandsockets.com/

New products and more ...

We are happy to inform you about our new products via email. Unfortunately our newsletter is only available in German. If you don't mind, please register with your email address on our German website:

Click here for the German newsletter archive and the opt-in procedure

* incl. applicable VAT, plus shipping costs.