Entrance door fitting DESSAU (Q) - Rosette fitting - Brass
Please select design:
Surface
side of hinges
garniture type
More information
Description
- Material: Solid brass
Various surface finishes
Available as knob/handle-set - outside knob / inside handle
Available as handle set - outside handle / inside handle. Outside lever handle/inside lever handle
Please specify direction of action
Thumbturn Ø 50 mm
Lever handle 115 mm
Handle rosette 50 x 50 mm
Euro profile escutcheon 55 x 55 mm
Outer rosettes with threaded sleeves soldered to the back
for screwing through the door
Included: 8/10 spindle and screws
General product information
-
Entrance door fittings in Bauhaus style
This solid cast brass entrance door fitting is modelled on the Bauhaus style of the 1930s. Straight lines combined with a round handle make this design classic particularly appealing.
Specific product information
-
Knob/handle-set / handle set
Today, entrance door fittings are usually designed as knob/handle-sets. A knob/handle-set refers to the combination of a stationary knob or pull handle on the outside and a moving handle on the inside of the door. The knob and lever handle are connected by a rotatable knob/lever spindle. The door can only be opened from the outside with the key.
The door set can also be manufactured as a handle set. In this design, the door can be opened from the outside and inside with the lever handle, but it is not locked. As a special variant, we also offer these sets with a stationary knob on the outside or with a rotatable knob. Knob/lever spindle / spindle thickness
Knob/handle-sets have a rotatable knob/lever spindle that is screwed into the M10 thread of the knob. The pin has a thickness of 8 mm and is supplied with an additional sleeve for a 10 mm lock follower. This allows the delicate shape of the lever handle to be retained in accordance with its historical model. In other countries, different spindle thicknesses often apply.
Fittings with a lever handle on both sides are supplied with a standard 8 x 8 mm spindle with a sleeve.
The knob/lever spindle is supplied with a length of 100 mm and can be shortened on site with a hacksaw to suit the thickness of your door if necessary.Side of hinges - DIN left / DIN right
We need you to specify the side of hinges for this door handle. For doors that open inwards, the side of hinges are named as follows:- standing on the inside of the door, pulling the door open towards you: The door is mounted on the left side of the frame - DIN left side of hinges
- standing on the inside of the door, pulling the door open towards you: The door is mounted on the frame on the right-hand side - side of hinges DIN right
Surface finishes
These fittings are available in various surface finishes:- polished brass, unlacquered - gold-coloured - will darken, become slightly duller and more irregular
- shiny nickel-plated - shiny silver-coloured - may become slightly darker
- brushed, matt nickel-plated - matt silver-coloured with a light brushed texture - may become slightly darker
- dark patinated - brownish colouring - slightly irregular
- black matt - stove-enamelled
Mounting and security
The roses on the outside of this fitting are solidly designed and have a thickness of 10 mm. They have threaded sleeves soldered to the back. They are mounted by screwing through the door.
Mounting and care
-
Installation instructions
All assembly work should be carried out by a specialist (carpenter). They have the appropriate special tools and expertise to carry out the mounting without any problems. We accept no liability for damage caused by improper mounting.If you want to do the mounting yourself, here are some tips: The mounting of entrance door fittings requires precise work: The door must be drilled through exactly at right angles at the specified distances in order to be able to insert the threaded screws. The spindle is screwed into the thread of the knob and the supplied sleeve (for locks with a 10 mm follower) is fitted onto the spindle. The knob/lever spindle is inserted through the lock follower and the knob long plate or the knob on rose is fitted. For precise alignment of the backplate, it is advisable to insert the profile cylinder in advance. The inside plate is placed on the door and loosely screwed to the outside plate using the threaded screws. If the screws or knob/lever spindle are too long, they can be shortened with a hacksaw. The lever handle is placed on the spindle and loosely mounted to the spindle using a grub screw. Only when the plates or roses are precisely aligned is the final mounting carried out. Door plates or roses are then mounted on the door leaf using additional wood screws.
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and lively in colour. The fitting develops its own patina and approaches the appearance of original historical fittings. If you wish, you can polish it again from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth.
