1 hole-faucet for washstand
with pull rods-pop-up waste
incl. 2 stainless steel-flexible hoses to
connection on the water pipe
height 145 mm
width 190 mm
overhang 145 mm
Price: ¤ 222,00
Order this product:
Enlarge individual images
The nostalgic looking tapware of our TAMAS series are manufactured according to German product standards and have a high-quality interior. They are only available with chrome finishing.
Our tapware is crafted in solid brass, which is moulded into individual components within the treatment process. After moulding, every component is ground by hand to achieve an even, slightly rough surface as base for the subsequent final coating.
The surface of this tapware is chrome-nickel plated in two layers for long-term protection against corrosion and wear. Subsequent polishing by hand results in a high-gloss, scintillating surface.
The nostalgic star knobs of this tapware have a soft shape. The embedded lenses made of porcelain are labelled with the German words warm/kalt. If accidents happen, they can be easily replaced.
The tapware is equipped with a precisely regulated valve control: long-lasting ceramic shims with a hardness similar to diamonds and a smaller friction surface ensure unrivalled durability while reliably regulating the flow of water. All cartridges are easily replacable without special tools. The valves have been tested with a lifetime of 500,000 operating cycles. The tapware has been tested with regards to the following requirements: impermeability, mechanical and hydraulic process, mechanical wear characteristics, quality of the chrome finish, noise characteristics, dimensions.
The tapware can be completely dismantled into its individual parts, thus each component can be replaced.
We usually have small quantities of these items in stock. In case we do not have them in stock, please consider a lead time of approx. 14 days.
We ship with DPD as insured package, delivery costs Germany 6,80 € (+ possibly island surcharge), EU shipping: 17 €, non EU-countries: shipping costs on request.
Water contains chalk and other mineral constituents, which may settle on the tapware after the water evaporated. Residues of different articles of daily use like toth paste, toiletries and cosmetics as well as fruit and vegetable acids and wine can also affect the coating. Therefore please rinse the tapware with clear water after every use.
To maintain the high-quality surface of the tapware, we recommend to carefully clean it every day. Please do not use agressive and abrasive cleaning agents. Chlorine and bleach, acids, ammonia and soda corrode the surface and should not get used. Also avoid the use of abrasive cleaning devices, scouring powder and disinfectants.
Water and soap and a soft cloth are best for regular cleaning. Please be careful if you live in an area with very hard water! The alcaline constituents of soap may unite with the chalk in the water to form a so-called lime soap, that may settle as unpleasant dirt rims in the sink and on the tapware and are difficult to clean. In this case please use mild detergents that are suitable for use on tapware, e.g. the care product DECAL (from HORUS). It protects the tapware from mineral residues and can be used as needed.
Please note that damages resulting from improper cleaning and treatment can not be accepted as claims.
All accessories required for installation are part of the scope of delivery. Detailed instructions concerning installing are enclosed. Mounting must only be carried out by or under under the direction and supervision of a qualified specialist. We cannot accept any liability for damages due to incorrect mounting.
If you have further questions we are happy to help you personally or by by phone on Tuesdays to Fridays from 9.00 to 12.00 and 13.30 to 18.00 o'clock as well as on Saturdays from 10.00 to 14.00 o'clock.
By telephone: +49 (0)761 151 88 33
By email: Click here.
In our show rooms in Freiburg.
Schinkelstraße 7, 22303 Hamburg, Germany
Mon - Fri: 9.00 am to 3.00 pm
and by appointment
Our showroom in Hamburg will stay from 17. until 21. February closed.
At present our printed catalogue is out of stock. You are welcome to recieve a free catalogue (which is only in German and planned to print till summer 2020).
Things happen ... Ever head of Murphy's law? Our inconvenience becomes a »special offer« for you.
You can save these products on your list of favourites or you add them to your shopping cart. The list of favourites and items in the shopping cart are saved until your next visit. You can also take notes and write down questions regarding the products on your list of favourites or in the shopping cart and send the list or your shopping cart with all notes and questions to us. You can also send a link to your favourites to friends or colleagues. Just try it.
NEW: Since end october we present the entire range of Fontini-switches on a specially designed website. Not only will you find the retro series from the replicata catalogue there but also modern switches, that may yield maximal contrast to historical building structures.