Socket series GARBY - sockets - porcelain with decor - incl. base plate wood aged
More information
Description
- Combination article - consisting of:
103338-004 Porcelain socket with blue decor
103355-002 Base plate aged wood
Base plate with cut-out for conduit entry
An overview of all available
individual elements can be found
in the parts list (see info)
General product information
-
Surface mounting, as was common at the beginning of the last century, means the visible laying of cables, wires or pipes. These are laid directly or with spacer clips over plaster on the wall.
For a long time, surface-mounted installation was considered unsightly, even frowned upon, but sometimes unavoidable. Today, however, building technology no longer has to be hidden away. Used consciously, this switch system with its associated pipe system allows a new perspective on things and now helps to shape walls and rooms. Building technology can show itself again!
Specific product information
-
Material and manufacture
The GARBY / DIMBLER switch system is manufactured by the long-established Spanish manufacturer FONTINI, whose products we distribute in Germany.The body of the switches, sockets and junction boxes is made of porcelain. Porcelain has always been a popular material in electrical engineering: porcelain has a crystal-clear appearance, a pleasant feel and particularly good insulating properties.
The porcelain body has a small semi-circular opening at the bottom for cable entry. All switches, sockets and junction boxes are also available without a cable outlet if flush-mounted installation is required.
Safety and fire protection
All switches and sockets in this surface-mounted series comply with the standards required in Germany. They fulfil the strict safety regulations of the VDE.Important note: When mounting on flammable surfaces, the surface-mounted switches, sockets and junction boxes must be mounted on a fire protection plate in accordance with regulations. This is a plastic plate that is simply inserted at the back. This is not included in the scope of delivery.
Designs - sockets
The body of the sockets and junction boxes is made of porcelain. Porcelain has always been a favourite material in electrical engineering: porcelain has a crystal-clear aesthetic, a pleasant feel and particularly good insulating properties.
We offer the sockets in 2 designs: As a German Schuko socket or as a socket with centre contact for the French electrical system (F), both in the following design variants:- as a socket with a body made of porcelain and an inner part made of thermoset socket
- as a socket with a complete porcelain body
Designs - base plates
Wooden base plates are provided for surface-mounted installation. These are made of beech wood and are available in three different surface finishes:- natural, unlacquered
- honey-coloured lacquered
- aged, dark matt lacquered
It is also possible to place surface-mounted switches on a flush-mounted box. In this case, base plates without a cable outlet are suitable. If you have not installed a box, the switch can also be mounted directly on the wall without a base plate.
Tubes and accessories
The surface-mounted conduits made of iron (painted matt rust colour) have a length of 3 metres. They can also be split on request. We offer the tubes in 3 different diameters: 16 / 22 / 25 mm. Other connecting accessories should be selected in the appropriate diameter.
Mounting and care
-
Installation instructions
The interior is mounted on the base or the wooden base plate with 2 screws, wired, then the housing is slipped over it and screwed in place.We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.
Maintenance
Porcelain is extremely impact and scratch-resistant and does not require any special care. A soft cloth is simply recommended for occasional cleaning.
