Bathtub faucet series JULIA - 4-hole tap - rim-mounted
Please select design:
Surface
More information
Description
- available in various surface finishes
Mixer tap with hand shower
with flexible connecting hoses
Height 195 mm
projection 235 mm
Shower head with anti-limescale studs
Diverter on the spout
Hand shower with porcelain handle
Cross handles with porcelain lens
General product information
- The classic, playful taps in the JULIA series are manufactured in a small factory in France. They are high-quality taps and fittings that come with a 5-year guarantee from the manufacturer HORUS (excluding wearing parts).
Specific product information
-
Valves and spare parts
All internal valves are fitted with a wear-resistant ceramic seal that reliably regulates the water flow. These are of course still available as spare parts even after a lengthy service life. The tap can be completely dismantled into its individual parts, meaning that every component can be replaced. Individual components can also be reordered as spare parts. Simply enquire if required! Handle design
There are various handle options for this mixer tap series. The nostalgic cross handles have a classic shape with small decorative spheres at the end. The inlaid porcelain lenses are labelled with the French inscription chaud / froid. On request, these can also be supplied in a neutral colour, without the inscription. Alternatively, the taps in the series JULIA are also available with porcelain handles. These turning handles are made of white, finely curved porcelain. If the porcelain parts break or are chipped due to an accident, they can simply be replaced.Manufacture
Our fittings are made of solid brass, which is moulded into individual components in various machining processes. After moulding, each component is sanded by hand to obtain an even, slightly rough surface as a base for the subsequent final coating.Surfaces
This fitting is available in 4 different surface finishes as standard, offering the right finish for almost every installation situation and every taste.- Chrome - high-gloss, cool silver colour
- Nickel - high-gloss, warm silver colour
- Nickel - matt, rather darker silver colour
- Brass - patinated, slightly brownish and rather irregular brass colour
- Brass - dark patinated
Mounting and care
-
Cleaning and care
Water contains limescale and other mineral components that can settle on the tap once the water has evaporated. Residues from various items such as toothpaste, body care products and cosmetics, as well as fruit and vegetable acids and wine, can also attack the coating. Therefore, rinse the mixer taps with clear water after each use.In order to maintain the high-quality surface of the mixer taps in the long term, careful daily cleaning is recommended. Do not use any aggressive or abrasive cleaning agents. Chlorine and bleaching agents, acids, ammonia and soda attack the surfaces and should not be used. Abrasive cleaning equipment, scouring powder and disinfectants should also be avoided.
The best cleaning agents are soap and water and a soft cloth. Be careful in areas with very hard water! Here, the alkaline components of the soap can combine with the limescale contained in the water to form so-called lime soaps, which are deposited as unsightly rims in the washbasin and on the fittings and are difficult to clean. In this case, use mild cleaning agents that are suitable for use on taps, e.g. the care product DECAL (HORUS). It protects the fittings from mineral residues and can be used as required.
Please note that damage caused by improper treatment or care cannot be recognised as a complaint.
Mounting
All work on the water installation should be carried out and checked by a specialist or under their direction and supervision. We accept no liability for damage caused by improper installation.
