Pull handle ZELSKY - cast iron - dark patinated
More information
Description
- Material: cast iron
Surface: dark rust-coloured patina
Cranked handle
Handle length 215 mm
Rose 48 x 35 mm
Includes: fixing screws
General product information
-
Pull handles, also known as push handles or swing door handles depending on their intended use, are not connected to the door lock, unlike door handles. They are simply screwed onto the door leaf.
Pull handles are usually found on swing doors or pivot doors that can be opened in both directions and swing through. The handle is both a functional and design element. On large, glazed doors, a handle bent in a quarter circle provides additional protection for the door.Pull handles can also be used for sliding doors that are guided in front of the wall. The guide rail should then have a stopper device to prevent the handle from hitting the frame.
Pull handles are often fitted horizontally on the centre frieze of old front doors. The handle serves as a pull or push handle if only a locking cylinder is inserted in the lock area.
Specific product information
-
Material and surface
This pull handle is manufactured in an iron foundry according to an old template. To give the handle a historical appearance right from the start, it is already treated with a rust patina at the factory. This will change over time and does not provide any rust protection.
Mounting and care
-
Installation instructions
Mounting pull handles is not very complicated: They are simply screwed onto the door leaf. The matching fixing screws are included in the scope of delivery.All installation work should be carried out by a specialist. We accept no liability for damage caused by improper mounting.