Pull handle PAMINA - brass - matt nickel
Please select design:
Surface
More information
Description
- Material: solid brass
Surface: brushed - matt nickel-plated
Handle length 220 mm
Roses 40 x 80 mm
Including: fixing screws
General product information
-
Pull handles, also known as push handles or swing door handles depending on their intended use, are not connected to the door lock, unlike door handles. They are simply screwed onto the door leaf.
Pull handles are usually found on swing doors or pivot doors that can be opened in both directions and swing through. The handle is both a functional and design element. On large, glazed doors, a handle bent in a quarter circle provides additional protection for the door.Pull handles can also be used for sliding doors that are guided in front of the wall. The guide rail should then have a stopper device to prevent the handle from hitting the frame.
Pull handles are often fitted horizontally on the centre frieze of old front doors. The handle serves as a pull or push handle if only a locking cylinder is inserted in the lock area.
Specific product information
-
Materials and surface
Our brass pull handles are recasts based on original models. They are available in 3 different surface finishes:- Brass polished, unlacquered - gold-coloured - will darken, become slightly duller and more irregular
- High-gloss nickel-plated - shiny silver-coloured - may become slightly darker
- Brushed, matt nickel-plated - matt silver-coloured with a light brushed texture - may become slightly darker
Mounting and care
-
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and lively in colour. The fitting develops its own patina and approaches the appearance of original historical fittings. If you wish, you can polish it again from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth. Installation instructions
Mounting pull handles is not very complicated: They are simply screwed onto the door leaf. The matching fixing screws are included in the scope of delivery.All installation work should be carried out by a specialist. We accept no liability for damage caused by improper mounting.
