Pull knob ROSE - brass
Please select design:
Surface
Design
More information
Description
- Material: Solid brass
Various surface finishes
Standard version:
Fixed with threaded sleeves soldered to the back
With M10 internal thread for screwing through the door
Special versions on request:
- without thread for screwing on
- design as rotatable knob
knob Ø 45 mm
rose 62 x 62 mm
Includes: fixing screws
General product information
-
The classic place for a door knob is historically on the centre frieze of the door. It occupies a central position there and helps to shape the door with its ornamentation. Accordingly, historical door knobs are often heavily designed and decorated and appear very powerful.
The larger door knob models are usually not suitable for the lock area. If the frieze is not wide enough, there is otherwise a risk of pinching fingers when opening and closing. It is therefore essential to pay attention to the knob diameter when making your selection!
Mounting and care
-
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and vibrant in colour. The hardware develops its own patina and approaches the appearance of original historical hardware. If you wish, you can polish the sliding door shell from time to time. We recommend the polishing pad Nevr Dull® for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth.
