Entrance door handle set PRIEN - patinated cast iron
Please select design:
Distance
More information
Description
- Entrance door fittings with lever handle on both sides
Material: cast iron
Surface: patinated, unpainted
Complete fitting for inside and outside of the door
Shield length 325 mm
Shield base width 50 mm
Lever handle length 135 mm
Includes spindle 8/10 mm and screws
General product information
-
Front door sets from the Historicism period were often decorated with elaborate ornamentation. This model made of heavy cast iron is a prime example of this.
The set is covered with a dark patina and therefore has a rather rustic character.
Specific product information
-
Design as handle set
This door set is only available as a set with a lever handle on both sides. With this design, the door can be opened from the outside and inside with the lever handle, but it is not locked. Distance / euro profile cylinder perforation
Entrance door fittings are supplied with euro profile cylinder perforations (abbreviation: PZ) for mortise locks as standard. The door plates have a perforation for the knob or lever handle and a perforation for the profile cylinder. We only supply this door set with the standard euro profile 92 or 72 distance for front door locks, measured from the centre of the handle hole to the centre of the round part of the cylinder hole.
