System covering PORZELLAN - centre section - for central insert
More information
Product details and dimensions
- for mounting all components
except junction boxes
Ø 82 mm
General product information
-
The light switch
The light switch - it is used every day and yet receives little attention. It is usually only seen as a necessary, functional detail. With these "old" light switches, you can make switching on a conscious daily activity again. The light switches with their soft shapes also serve as stylish design objects for the wall. Whether rotary switches or rocker switches - this is ultimately a question of personal preference. Porcelain and Duroplast
Covers, rotary knobs and switch knobs are made of porcelain, a material that is unique with its radiant lustre and smooth surface that is pleasant to the touch. Porcelain has very good insulating properties and is extremely strong. The porcelain type C 110 used complies with the standard for material properties in accordance with DIN VDE 0335 Part 3.The central insert of the porcelain - sockets and the thermoset junction boxes is made of a colour-coordinated thermoset. Duroplast is one of the first industrially produced plastics. The material is characterised by its high thermomechanical strength. It is lightfast and does not yellow over the years.
Specific product information
-
VDE certification
All switches and sockets are VDE tested and fulfil the strictest safety regulations. Cover frame
Switches, sockets and junction boxes can be ordered as so-called inserts and the desired cover frames can be ordered separately. This means that switches and sockets can be freely combined and arranged.Please note that separate single cover frames with a larger inner diameter are required for junction boxes. The double cover frames are not designed for this. However, you can insert the junction boxes into the special outer frames of the system cover instead.
The distances of the system covers correspond to the standard distances of 71 mm. They can be used with existing installations without any problems. For double coverings and system coverings, make sure that you use round flush-mounted boxes.
Mounting and care
-
Installation instructions
All flush-mounted switch systems naturally fit into commercially available, standardised flush-mounted boxes (e.g. from Kaiser).
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting. Cleaning and care
The switches are resistant to heavy wear and tear (e.g. scratches). They are easy to clean with standard household cleaning agents
