Rocker switch VENEZIA - white - chrome-plated toggle lever
Please select design:
functionality
More information
Product details and dimensions
- without cover frame
General product information
-
Rotary switches or toggle switches are a relic from earlier times. But they are now available again, also as a variant for today's standard flush-mounted installation. With these switches, switching on the light becomes a conscious act of switching on the light again - with a small audible "click".
The VENEZIA switch system is manufactured in Spain by the long-established manufacturer FONTINI, whose products we distribute in Germany.
The series is characterised by its wide range of variations. The switches and inserts are available with cover frames in a wide variety of materials and surfaces. This allows you to combine freely and put together "your" switch.
Specific product information
-
Materials and surfaces
Base plate
The base plate of the switches, on which the rotary knob or toggle lever is placed, is made of white or brown coloured duroplast. It is recessed into the frame and closes flush.
Rotary knob or toggle lever
The rotary knobs and toggle levers are made of white porcelain, honey-coloured lacquered wood or brass - lacquered, nickel-plated or chrome-plated.
Cover frame
The cover frames are available in various designs:
- Porcelain - white or black or in pastel shades
- Beech wood - round or square - natural or aged or honey-coloured lacquered
- Brass - light or brass patinated or satin nickel-plated
Designs - switches and push-buttons
The rotary or rocker switches are available with 3 different functionalities:- Two-way switch - if you want to switch a light source from one or two positions
- Intermediate switch - if you want to switch a light source from a third position
- Multi-circuit switch - if you want to switch two light sources with just one switch (one after the other or, in the case of toggle switches, next to each other)
- Switch - if you want to switch two light sources with just one switch. (arranged next to each other in the case of rocker switches)
Pushbuttons are generally used when operation is required from at least 3 points, e.g. in stairwells or lengthy corridors. In contrast to intermediate switches, this installation requires a impulse switch (relay), but the wiring and design of the light switches is simpler. A staircase light timer (time relay) can also be used instead of the impulse relay.
Design - surface mounting
If you want to use the switches in the VENEZIA series for surface mounting, a (rust-coloured painted or galvanised) double junction box is provided to match our GARBY series pipe system.VDE certification
All switches and sockets in this series comply with the standards required in Germany. They fulfil the strict VDE safety regulations.
Mounting and care
-
Installation instructions
All inserts are supplied on mounting plates so that they can be fitted to standard flush-mounted boxes.We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting.
