Handle shell JANA (K) - for patio doors - brass
Please select design:
Surface
More information
Product details and dimensions
- Material: brass
various surfaces
35 x 105 mm
installation depth 15 mm
with 2x M6 internal thread / screw hole spacing 80 mm
screw connection on the back - for mounting in pairs
with lift and slide door handle
Specific product information
- This handle shell is attached to the outside of a sliding patio door so that it can be opened and closed from the outside when open. It is fastened from the inside using metric screws. The distance between the drill holes is 80 mm as standard.
Mounting and care
-
Care instructions
Brass is alive! We always deliver brass fittings unlacquered. The surface will darken slightly and become more irregular and lively in colour. The fitting develops its own patina and approaches the appearance of original historical fittings. If you wish, you can polish it again from time to time. We recommend Nevr Dull® polishing pad for this purpose. Nickel-plated surfaces are sensitive to acids. They should only be cleaned with a mild detergent and a soft cloth. Installation instructions
If possible, the handle shell should be recessed flush with the surface. We recommend that you only make any cut-outs once you have the item.All installation work should be carried out by a specialist. We accept no liability for damage caused by improper mounting.
