Glass system covering - outer part - full-surface - for rotary switches without central insert
More information
Product details and dimensions
- Ø 82 mm
for mounting the rotary switches
without central insert
General product information
-
The light switch
The light switch - it is used every day and yet receives little attention. It is usually only seen as a necessary, functional detail. With these "old" light switches, you can make switching on a conscious daily activity again. The light switches with their soft shapes also serve as stylish design objects for the wall. Whether rotary switches or rocker switches - this is ultimately a question of personal preference. - Light switches with glass covers have been around since the 1930s, and now they're back! The transparent glass frames make the switch almost disappear. The light switch thus becomes part of the wall design in a discreetly elegant way.
Specific product information
-
VDE certification
All switches and sockets are VDE tested and fulfil the strictest safety regulations. Glass frame
The glass frames have a thickness of 4 mm and are thermally tempered. They have a bevelled edge of 45° with finely polished edges so that the frame is not perceived as a disturbing ring.All switches, sockets and junction boxes can be ordered as so-called inserts and the desired cover frames can be ordered separately. This allows you to combine and arrange them as you wish.
Please note that the rotary switches are available with and without a central insert. The glass cover must be selected accordingly.
The distances of the system covers correspond to the standard distances of 71 mm. They can be used with existing installations without any problems. For system covers, make sure that you use round flush-mounted boxes.
Mounting and care
-
Installation instructions
All flush-mounted switch systems naturally fit into commercially available, standardised flush-mounted boxes (e.g. from Kaiser).
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting. Cleaning and care
The switches are resistant to heavy wear and tear (e.g. scratches). They are easy to clean with standard household cleaning agentsInstallation instructions for glass frames
The glass covers are supplied with templates made of white cardboard, which can be inserted directly underneath the glass covers for a perfect fit. The cardboard covers can be covered with wallpaper or painted in the desired wall colour. After any removal of the switches (e.g. for technical testing), they ensure that the original uniform appearance with the wall is maintained.
