Fleckstop S234 - packaging 1 l
More information
Product details and dimensions
- for impregnating cement tiles
CASTILLO, AZUL, ARTE
and BREDA, FINA
Consumption approx. 1 litre per 5 m²
Apply until saturated, more if required!
Tiles must be dry when applied:
Remaining floor moisture max.2-4% !!!
General product information
-
Cement tiles
Cement tiles were already being produced in France in 1850. They quickly spread throughout the Mediterranean region, where they can still be admired today in stately villas or public buildings.Even today, tiles are still made by hand, slab by slab. A coloured mixture is made from marble powder, white cement and pure colour pigments, which is filled with a carrier layer and pressed together under high pressure. This produces solid and hard-wearing tiles with a slightly porous surface and a colour and wear layer that is around 3 mm thick. Due to the manufacturing process, the cement tiles have their typical unmistakable characteristics: a silky smooth surface, elegantly iridescent colours and slightly uneven edges.
- Cement tiles were already being produced in Portugal centuries ago under the influence of the Moors.
Even today, the tiles are still made piece by piece by hand. A coloured mixture is made from marble powder, white cement and pure colour pigments, which is filled with a backing layer and pressed together under high pressure. This produces solid and hard-wearing tiles with a slightly porous surface and a colour and wear layer that is around 3 mm thick. Due to the manufacturing process, the cement tiles have their typical unmistakable characteristics: a silky smooth surface, elegantly iridescent colours and slightly uneven edges.
Mounting and care
-
Maintenance care
Every plastering process consists of cleaning and maintenance. For cement-bound floor tiles, it is important that cleaning is not carried out with acidic cleaning agents, but with alkaline, slightly refatting agents!!! Under no circumstances should harsh, acidic or limescale-dissolving cleaning agents be used, as these will attack the tile material! We recommend maintenance care with HKM P324 Precious Stone Soap.For a period of around six months after installation, Precious Stone Soap P324 should be used to mop the tiled surfaces. The precious stone soap contains natural oils that supplement the protective layer each time it is cleaned. This can also be used for ongoing maintenance care. Alternatively, you can also use a good soft soap.
Good things take time - a patina only builds up over time and protects the floors maintained in this way.
