Entrance door fitting MONACO - wrought iron - black matt
Iron door fitting for the front door in country house style
Front door fittings made of wrought iron have a long tradition. They are mainly found in rural areas. However, the MONACO door set does not have a rustic look, but has clear shapes and a finely crafted surface.
The door knob on the outside is fixed to a round rosette, while the movable door handle is guided on the inside by a lever handle rosette.
The outer rosettes are fitted with threaded sleeves on the back. The rosettes are fixed from the inside through the door. This means that they cannot simply be unscrewed from the outside. The solid PZ key rosettes have a thickness of 12 mm and are designed as protective rosettes. On request, the outer escutcheon can also be fitted with cylinder protection.
The entrance door fitting is still traditionally handcrafted in Italy. Other designs are possible. Simply enquire!
Please select design:
garniture type
side of hinges
More information
Product details and dimensions
- Material: wrought iron
Surface: galvanised - black matt lacquered
Handle length 115 mm
Outer rosette Ø 60 x 12 mm
Inner rosette Ø 60 x 6 mm
Knob Ø 58 mm
Including knob/lever spindle and screws M6 x 100 mm
Specific product information
-
Knob/handle-set / handle set
Today, entrance door fittings are usually designed as knob/handle-sets. A knob/handle-set refers to the combination of a stationary knob or pull handle on the outside and a moving handle on the inside of the door. The knob and lever handle are connected by a rotatable knob/lever spindle. The door can only be opened from the outside with the key.
The door set can also be manufactured as a handle set. In this design, the door can be opened from the outside and inside with the lever handle, but it is not locked. As a special variant, we also offer these sets with a stationary knob on the outside or with a rotatable knob. Knob/lever spindle / spindle thickness
Knob/handle-sets have a rotatable knob/lever spindle that is screwed into the M10 thread of the knob. The pin has a thickness of 8 mm and is supplied with an additional sleeve for a 10 mm lock follower. This allows the delicate shape of the lever handle to be retained in accordance with its historical model. In other countries, different spindle thicknesses often apply.
Fittings with a lever handle on both sides are supplied with a standard 8 x 8 mm spindle with a sleeve.
The knob/lever spindle is supplied with a length of 100 mm and can be shortened on site with a hacksaw to suit the thickness of your door if necessary.Side of hinges - DIN left / DIN right
We need you to specify the side of hinges for this door handle. For doors that open inwards, the side of hinges are named as follows:- standing on the inside of the door, pulling the door open towards you: The door is mounted on the left side of the frame - DIN left side of hinges
- standing on the inside of the door, pulling the door open towards you: The door is mounted on the frame on the right-hand side - side of hinges DIN right
Mounting and security
These entrance door fittings are security fittings with a 12 mm thick outer rosette. The knob and key escutcheons are screwed through the door from the inside using metric screws.
Mounting and care
-
Installation instructions
All assembly work should be carried out by a specialist (carpenter). They have the appropriate special tools and expertise to carry out the mounting without any problems. We accept no liability for damage caused by improper mounting.If you want to do the mounting yourself, here are some tips: The mounting of entrance door fittings requires precise work: The door must be drilled through exactly at right angles at the specified distances in order to be able to insert the threaded screws. The spindle is screwed into the thread of the knob and the supplied sleeve (for locks with a 10 mm follower) is fitted onto the spindle. The knob/lever spindle is inserted through the lock follower and the knob long plate or the knob on rose is fitted. For precise alignment of the backplate, it is advisable to insert the profile cylinder in advance. The inside plate is placed on the door and loosely screwed to the outside plate using the threaded screws. If the screws or knob/lever spindle are too long, they can be shortened with a hacksaw. The lever handle is placed on the spindle and loosely mounted to the spindle using a grub screw. Only when the plates or roses are precisely aligned is the final mounting carried out. Door plates or roses are then mounted on the door leaf using additional wood screws.
