CONCAVO brass recessed bell - for the stylish old building door
Recessed bell for the stylish entrance area in old buildings
Recessed brass bells were very popular in the Art Nouveau style and are now a stylish option for entrance areas in older buildings, whether in the entrance area of the front door or in front of the front door.
The recessed bell is slightly recessed so that only the surrounding edge protrudes slightly above the plaster. This makes the bell a special design element at the entrance door. For aesthetic reasons, no screw fixing is provided; it is simply attached using silicone or a mounting adhesive.
The solid brass doorbell is manufactured in a small traditional craftsman's workshop in Italy. Different surface finishes, whether polished or dark patinated brass, chrome-plated or anthracite-coloured lacquered, give the doorbell a unique look.
Please select design:
Surface
More information
Product details and dimensions
- Material: brass
various surface finishes
Ø 80 mm
without screw holes
mounting with silicone or mounting adhesive
General product information
-
The recessed shape, the so-called hollow, is the design element of this classic doorbell plate. It gives the bell push its frame and makes the bell a visual centre of attraction on your front door.
The rather simple shape of the bell makes it suitable for single-family homes, whether old or new buildings. It is also popular as a stylish storey bell on flat entrance doors.
Specific product information
-
Surface finishes
The bell plate is available in 5 different surfaces: - Brass polished, unlacquered - standard finish - will tarnish over time and become significantly darker
- Brass dark bronze patinated - matt, slightly irregular coloured surface
- Brass graphitised - anthracite lacquered, black-matt shimmering, iron-like
- Brass chrome-plated - high-gloss silver-coloured
- Brass PVD-coated - high-gloss gold-coloured, impact and scratch-resistant, no colour change
Doorbell contact
The doorbell contact is a 12V screw contact that can be easily wired to the existing connection cables.
Mounting and care
-
Mounting
For mounting, a small, circular cut-out with a depth of approx. 10 mm must be made in the masonry. No fixing holes are provided for this recessed doorbell so as not to detract from the simple overall appearance. The doorbell contact is simply wired, the doorbell recess is glued into the masonry on the back with silicone adhesive and sealed.
All installation work should be carried out by a specialist. We accept no liability for damage caused by improper mounting.
