Clock thermostat DUROPLAST - USB temperature controller
More information
Product details and dimensions
- Central insert made of Duroplast, with LCD display
for time-dependent control of the room temperature or floor temperature for almost all types of heating.
Switching times and other settings are entered via the PC using a USB connection.
Operating voltage: 230V~ / 50 Hz
Contact: NO contact 230V~ 10(2)A
Protection class: IP 30
Protection class: II according to mounting
without outer covering frame
General product information
-
The light switch
The light switch - it is used every day and yet receives little attention. It is usually only seen as a necessary, functional detail. With these "old" light switches, you can make switching on a conscious daily activity again. The light switches with their soft shapes also serve as stylish design objects for the wall. Whether rotary switches or rocker switches - this is ultimately a question of personal preference. Duroplast
Duroplast is one of the first industrially produced plastics. The material is characterised by its high thermomechanical strength. It is lightfast and does not yellow over the years.
Specific product information
-
Mechanical inner workings
The rotary and rocker switches as well as the push-buttons have a solid ceramic body.The spring mechanism of the rotary switch consists of 42 individual parts and is the result of mechanical precision work: regardless of the speed of the rotary movement, a uniform switch contact is guaranteed, which is closed with a light, familiar click - the switch mechanism thus prevents the arcing effect that threatens to impair the switching contacts in the long term, even with alternating current. To ensure a safe switching process, the snap-action mechanism is also galvanised.
All switches and sockets in this series are manufactured in Germany.
Cover frame
All switches, sockets and junction boxes can be ordered as so-called inserts and the required cover frames can be ordered separately. This allows you to freely combine and arrange switches and boxes.Please note that separate individual frames are provided for dimmers and junction boxes.
The distances of the multiple covers and system covers correspond to the standard distances of 71 mm. They can be used with existing installations without any problems. For system covers, make sure that you use round flush-mounted boxes.
VDE certification
All switches and sockets are VDE tested and fulfil the strictest safety regulations.
Mounting and care
-
Installation instructions
All flush-mounted switch systems naturally fit into commercially available, standardised flush-mounted boxes (e.g. from Kaiser).
We would like to point out that all installation work on electrical installations must be carried out by a specialist. We accept no liability for damage caused by improper mounting. Cleaning and care
The switches are resistant to heavy wear and tear (e.g. scratches). They are easy to clean with standard household cleaning agentsInstallation instructions for glass frames
The glass covers are supplied with templates made of white cardboard, which can be inserted directly underneath the glass covers for a perfect fit. The cardboard covers can be covered with wallpaper or painted in the desired wall colour. After any removal of the switches (e.g. for technical testing), they ensure that the original uniform appearance with the wall is maintained.
