Border tile DORA - series AMARCORD - 3 x 20 - fumo matt
More information
Product details and dimensions
- 30 x 200 x 12 mm
glazed
Specific product information
-
Minimum order quantities
The rectangular, square and octagonal base tiles can be ordered in the following packaging units- Rectangular tiles - 10 x 20 cm - PU 50 pcs = 1 sqm
- Square tiles - 20 x 20 cm - PU 25 pcs = 1 sqm
- Octagonal tiles - 20 x 20 cm - PU 25 pcs = 0.96 sqm
Decorative tiles, borders and skirting tiles can be ordered individually per piece.
Colours and availability
The tiles in the AMARCORD series are available in 5 colours, which can be freely combined with each other. Please note that the octagonal tiles and square tiles are only available in the two basic colours white (Bianco) and beige.
Mounting and care
-
Cleaning and care
Glazed tiles, including matt-glazed tiles, can be easily cleaned with a sponge or soft cloth using neutral all-purpose cleaners (e.g. FILACleaner or MAPEI Keranet). To avoid damaging the glaze, please do not use steel sponges and do not use acidic cleaning agents Laying instructions
When laying the unicoloured tiles, ensure a random cross-mix to achieve a lively and balanced appearance. To do this, remove the tiles alternately from all boxes when laying.Borders and ornamental strips in a tile panel should be laid with staggered joints so that the joint pattern is interrupted and the surface is structured horizontally. This allows ornaments, colours and glaze effects to really come into their own.
All installation work must be carried out by a tiler who is familiar with the specific material properties. We accept no liability for improper processing.
Laying
When laying the tiles, we recommend using an elastic adhesive of class C2T in accordance with EN12004. The joints should be at least 2 mm wide. Use a high-quality ready-mixed mortar for grouting. We recommend choosing a grout colour that is as neutral as possible.For more detailed information on adhesive and grout, please refer to the respective manufacturer's instructions. As tiles from different manufacturing processes (dry pressing, wet pressing and extrusion) are usually laid in a bond during installation, we recommend having the installation carried out by qualified specialists in order to professionally compensate for the typical differences in calibre of non-industrial tile production during installation.
